Troubleshooting tips, Before you call for service – GE JGP330 FR Manuel d'utilisation

Page 14

Advertising
background image

Safety Instructions

Operating Instructions

Care and Cleaning

Tr

oubleshooting T

ips

Consumer Support

Before you call for service…

Troubleshooting Tips
Save time and money! Review the charts on these pages first
and you may not need to call for service.

Problem

Possible Causes

What To Do

Burners have yellow or

The combustion quality of

• Use the illustrations below to determine if your burner

yellow-tipped flames

burner flames needs to be

flames are normal. If burner flames look like A, call for

determined visually.

service. Normal burner flames should look like B or C,
depending on the type of gas you use. With LP gas, some
yellow tipping on outer cones is normal.

A–Yellow flames

B–Yellow tips

C–Soft blue flames

Call for service

on outer cones

Normal for natural

Normal for LP gas

gas

Control knobs

Knob isn’t pushed down.

• To turn from the OFF position, push the knob down

will not turn

and then turn.

Burners do

Plug on cooktop is not

• Make sure electrical plug is plugged into a live, properly

not light

completely inserted in the

grounded outlet.

electrical outlet.

Gas supply not connected

• See the Installation Instructions that came with your

or turned on.

cooktop.

A fuse in your home may be

• Replace the fuse or reset the circuit breaker.

blown or the circuit breaker
tripped.

Burner parts not replaced

• See the Care and cleaning of the cooktop section.

correctly.

The electrodes under the

• See the Care and cleaning of the cooktop section.

burners are soiled.

The white ceramic electrodes

• See the Care and cleaning of the cooktop section.

are not securely seated under
the burners.

Cooktop is locked.

• Unlock the cooktop. See the Using the cooktop

burners section.

The igniter hole (on some

• See the Care and cleaning of the cooktop section.

models) is plugged.

Ticking sound of spark

Control knob is still

• Turn the knob out of the LITE position to the desired

igniter persists after

in the LITE position.

setting.

burner lights

• Turn the burner off and relight. If ticking is still

present, call for service.

Burner flames very

Improper air to gas ratio.

• If cooktop is connected to LP gas, check all steps

large or yellow

in the Installation Instructions that came with
your cooktop.

14

Advertising
Ce manuel est liée aux produits suivants: