Fisher PLC-XU86 - Manuel (Page 43)

43
Video Input
Press the Point 7 8
buttons to adjust the value.
Press the MENU button to display the On-Screen
Menu. Press the Point
7 8 buttons to move the red
framed pointer to the Image Adjust Menu icon.
1
2 Press the Point ed buttons to move the red framed
pointer to the item that you want to adjust and then
press the SELECT button. The level of each item is
displayed. Adjust each level by pressing the Point
7
8 buttons.
Move the red framed
pointer to the item you
want to adjust and then
press the SELECT button.
Image Adjust Menu
Press the Point 7 button to decrease the contrast and the
Point 8 button to increase contrast. (From 0 to 63.)
Press the Point 7 button to adjust the image darker and the
Point 8 button to adjust the image brighter. (From 0 to 63.)
Contrast
Brightness
Press the SELECT button
at this item to display other
items.
Image Adjust Menu icon
Press the Point 7 button to lighten the color and the Point
8 button to deepen the color. (From 0 to 63.)
Press the Point 7 8 buttons to obtain a proper color. (From
0 to 63.)
Color
Tint
Press the Point 7 button to lighten the red tone and the
Point 8 button to deepen the red tone. (From 0 to 63.)
White balance (Red)
Press the Point 7 button to lighten the green tone and the
Point 8 button to deepen the green tone. (From 0 to 63.)
White balance (Green)
Press the Point 7 button to lighten the blue tone and the
Point 8 button to deepen the blue tone. (From 0 to 63.)
White balance (Blue)
Press the SELECT
button at this item to
display previous items.
✔
Note:
•The Tint cannot be selected when the video system is PAL, SECAM,
PAL-M, or PAL-N. (p41)
•After adjusting any of the White balance Red, Green or Blue, the
Color temp. will change to "Adj.".
Image Level Adjustment
Press the Point 7 8 buttons for Color temp. level that you
want to select. (XLow, Low, Mid, or High)
Color temp.
Video Input