Fisher PLC-XU86 - Manuel (Page 27)

27
Basic Operation
Remote Control
Remote Control Operation
For some frequently used operations, using the remote control is advisable.
Just pressing one of the buttons enables you to make the operation, and no need for calling up the On-Screen
Menu.
COMPUTER/VIDEO
/NETWORK button
✔
Note:
See the next page for the other buttons.
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
FREEZE button
Press the COMPUTER, VIDEO, or NETWORK button on the
remote control to select the input source.
For more detail, see p29, 30, 39, 40.
Refer to the owner's manual (Additional Vol.) for details
about Network input.
COMPUTER / VIDEO / NETWORK button
FREEZE button
Basic Oper
ation
Press the AUTO PC button on the remote control to operate
the Auto PC function.
For more detail, see p32.
AUTO PC button
Press the D.ZOOM buttons on the remote control to zoom
in and zoom out the images.
For more detail, see p38.
D.ZOOM buttons
LAMP CONTROL button
Press the LAMP CONTROL button on the remote control to
select the lamp mode for changing the brightness of the
screen.
Normal ....normal brightness
Auto ........brightness according with the input signal
Eco ..........lower brightness reduces the lamp
power consumption and extends the
lamp life.
For detail, see p25.
KEYSTONE button
For detail, see p25.
AUTO SET button
D.ZOOM
buttons
AUTO PC
button
AUTO SET button
(See p25)
POINT ed buttons
LAMP
CONTROL
button
KEYSTONE button
(See p25)