Fisher PLC-XU86 - Manuel (Page 14)

14
Part Names and Functions
The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse,
connect your computer and the projector with the supplied USB cable. (See page 18 for connection.)
When the Pointer function is used, the wireless mouse is not available.
Move the pointer on the
screen with this button.
PRESENTATION POINTER
button
R-CLICK button
L-CLICK button Acts as right click while the
projector and a computer are
connected with a USB cable.
Acts as left click while the
projector and a computer are
connected with a USB cable.
This projector has eight different remote control codes (Code 1-Code 8). Switching remote control codes
prevents remote control interference when operating several projectors or video equipment at the same time.
Change the remote control code for the projector first before changing that for the remote control. See
“Remote control” in Setting on page 51.
With holding down the MENU button, press the
IMAGE button. The code switches sequentially for
one pressing the IMAGE button. (See the list below.) 1
To initialize the remote control code, slide the
RESET/ON/ALL-OFF switch to RESET, and then to ON.
The initial code is Code 1. 2
While pressing the MENU
button, press the IMAGE
button number of times
corresponding to the
remote control code.
MENU button
IMAGE button
Remote Control Code
Remote Control Code
Number of Times of
Pressing IMAGE
Button
Code 1 1
Code 2 2
Code 3 3
Code 4 4
Code 5 5
Code 6 6
Code 7 7
Code 8 8
Wireless Mouse Operation